2) Light, easy to carry
3) earching your baby, key, car and dog
5)Support ios and android
Bluetooth 4.0 Tracker MyTag
Phone,keys, wallet, bags, even cars, Discovering that you’re missing any of theseitems could easily trigger a panic attack,
Yet they’re all so easy to misplace.
How many times have you spent twenty minutes looking for keys that were buried,between the couch cushions?
Mtag may help you win that losing battle.
Acting as a Bluetooth 4.0 device that attaches to your key ring and connects to your phone,
It can give you the opportunity to find the missing item
If it’sless than 30 feet* away. It can also send notifications when the VTag and youriPhone 4s
are out of range from each other
Hook it onto your key ring (or anyother valuable you misplace often), download the axaet app on iPhone 4Sand new iPad
Bluetooth Â® Ver.4.0
Spectrum frequency hopping diffusion method (FH-SS)
Transmit frequency range
2.4GHz ~ 2.4835GHz
(Depending on use environment) 20m
Standing by Power consumption
(Depending on use environment) about 0.6 year.
Our device is triggered through the Atag and MyTag app and Bluetooth 4.0 technology.
When you can't seem to find your keys, tap the middle button in the app. If your tag device is within a preset range, it will signal its position by beeping.
If you're not within range, you can walk around with the app open and the on-screen proximity display will sync with the device's built in sensor.
Mtag can also be placed inside Car, your iPhone 4S or new iPad will record GPS data of your parking place, and will help you quickly find the way to your car.
Because of Bluetooth’s low power feature, the Smartag can go up to six months before you replace the CR2032 battery with a new one.
Mtag is an iOS and android app which can work with Smartag device.
After your IOS Phone or new iPad and android phone with android 4.3 or above system install Mytag and open Bluetooth, your Phone can easily pair with Mytag.
You can find your keys easily with beeps and whenever it’s run out of the preset by trigger Mytag from your iPhone 4S; Mytaghelps to achieve “No More Searching for Keys”, you might spend less time looking and more time doing.
When a your tag is attached with your car, Mytag could record where it is last parked place, and will guide you to find your car soon.
To download the Atag from the Apple AppStore or MyTag from the google play store
Scenario A: Find Key,bags and other valuable item & Missing Remind
Run Mytag App in iPhone4S, the tag will beep till you find lost item after you touch findme icon in service ready status .
Put tag in your bag, when iPhone4S and bag move out of a specified range, both iPhone4S and Smartag will beep to alert. iPhone 4S can have different sound and vibration to remind you.
1)Open the case by small tools or hand
2)Putting CR2032 battery into battery slot ,the CR2032 number down with case
3)Close the cover and press the button to power on my tag
1)Open cover and release it and then take it out.
State of Paring:
1)Power on My tag and go to phone app
2)Put my tag close phone,then search on phone app,the more near with phone the stronger the single
3)Press Mtag to pairing,then will go home page of app
State of Disconnecting:
1)It will be disconnected beyond the control of Mtag APP
2)At this time, green light will flashes slowly and interval time is 5 seconds
1)You can close “Mytag” in state of paring control by app